처음화면 > PRODUCTS > 센서 Sensor > 앵글/각도 센서 [Angle Sensor] > 제품상세
앵글/각도 센서 [Angle Sensor]
| 동양전기공업의 제품을 소개합니다.
다른이미지보기
CP-2HK-8R 시리즈 - 앵글센서
상품코드 : 053000126
* 일본산 Contactless Hall-IC Angle 앵글센서 입니다.
* Effective Electrical Travel : ±40º (Option:270º ,300º ,360º)
신규재고요청가능
제품 상세 정보 (Product Features)
・Contactless Hall-IC Angle Sensor
・Absolute Linearity : ±1%FS (Independent Linearity: ±0.5%FS)
・CP-2HK
: Input Voltage DC5±0.5V
・CP-2HK-8R
: Input Voltage DC8±0.5V
・CP-2HK-10R
: Input Voltage DC10±0.5V
【원자재】
●하우징: 알루미늄
●샤프트: 스테인리스 강
●커버: 강(Steel),니켈 도금
●베어링: 스테인리스 강
*사용시 주의사항
・To avoid burnout of resistive element, do not supply more than 1mA current to terminal 2.
・Miswiring might cause burnout of resistive element.
・To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
・Slight continuous vibration such as dither might cause short lifetime of the sensor.
150m/s2 2000Hz 3 axis 2 hours each
500m/s2 11ms 6 directions 3 times
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
・Absolute Linearity : ±1%FS (Independent Linearity: ±0.5%FS)
・CP-2HK
: Input Voltage DC5±0.5V
・CP-2HK-8R
: Input Voltage DC8±0.5V
・CP-2HK-10R
: Input Voltage DC10±0.5V
【원자재】
●하우징: 알루미늄
●샤프트: 스테인리스 강
●커버: 강(Steel),니켈 도금
●베어링: 스테인리스 강
*사용시 주의사항
・To avoid burnout of resistive element, do not supply more than 1mA current to terminal 2.
・Miswiring might cause burnout of resistive element.
・To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
・Slight continuous vibration such as dither might cause short lifetime of the sensor.
150m/s2 2000Hz 3 axis 2 hours each
500m/s2 11ms 6 directions 3 times
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
Mechanical Spec
| Mechanical Angle | 360 Endless |
|---|---|
| Torque | MAX. 2 |
| Thrust Load Tolerance | 4N |
| Radial Load Tolerance | 14N |
| Mass | Approx.65 |
Environmental Spec
| Life Cycles | MIN. 50 Million |
|---|---|
| Category Temperature Range | -40 ~ +100℃ |
| Storage Temperature Range | -40 ~ +100℃ |
| Vibration | 100m/s2 3 axis 2 hours each |
| Shock | 1000m/s2 3 axis 6 directions 3 |
| EMS | 100V/m 200MHz - 1GHz |
| ESD (Case To Each Terminal) | ±12kV (IEC61000-4-2) |
| ESD (Between Each Terminal) | ±12kV (IEC61000-4-2) |
| IP Level | IP54 (Except shaft side |
Electrical Spec
| Effective Electrical Travel | ±40 (Option: ±135, ±150, ±180) |
|---|---|
| Output Range | 10~90 |
| Independent Linearity | ±1(FS=80°) |
| Input Voltage | DC8±0.5 |
| Load Resistance | MIN. 10MΩ |
| Supply Current | MAX. 13 |
| Output Resolution | 12 |
| Hysteresis | MAX. 0.1 |
Drawing
- Drawing
- CP-2HK mounting
- Output Characteristics
- Schematic
