로터리 스위치
| 동양전기공업의 제품을 소개합니다.
다른이미지보기
제품 상세 정보 (Product Features)
*추가제품옵션탭 에서 상세한 제품군을 찾을실 수 있습니다.
SPECIFICATIONS
-MAXIMUN RATING : 100 mA MAX.
-MAXIMUM VOLTAGE : 16 V
-J-HOOK, GULL-WING AND THROUGH HOLE
*PACKAGING OPTIONS
-J&G : 500 PCS
-Z : 200 PCS
-H : 100 PCS/TUBE
-솔더링 과정 중의 세척안내
1. Only Tape sealed types apply to wash process.
2. Do not remove the tape before wash process.
3. After soldering process, do not continue the wash process immediately. Please wait for at least 3 minutes.
4. Apply alcoholic solvents as cleaning agent do not use other solvents or water.
5. Ultrasonic cleaning is not recommended.
6. The cleaning process per stage is max. 1 minute and the whole cleaning time are not to exceed 3 minutes.
7. Do not impose any external force on switch while washing.
-솔더링 과정 중 플럭스(Flux)가 유입 될 경우 스위치의 오작동이 발생할 수 있습니다.
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
SPECIFICATIONS
-MAXIMUN RATING : 100 mA MAX.
-MAXIMUM VOLTAGE : 16 V
-J-HOOK, GULL-WING AND THROUGH HOLE
*PACKAGING OPTIONS
-J&G : 500 PCS
-Z : 200 PCS
-H : 100 PCS/TUBE
-솔더링 과정 중의 세척안내
1. Only Tape sealed types apply to wash process.
2. Do not remove the tape before wash process.
3. After soldering process, do not continue the wash process immediately. Please wait for at least 3 minutes.
4. Apply alcoholic solvents as cleaning agent do not use other solvents or water.
5. Ultrasonic cleaning is not recommended.
6. The cleaning process per stage is max. 1 minute and the whole cleaning time are not to exceed 3 minutes.
7. Do not impose any external force on switch while washing.
-솔더링 과정 중 플럭스(Flux)가 유입 될 경우 스위치의 오작동이 발생할 수 있습니다.
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
Mechanical Spec
Positions | 2 |
---|---|
Adjustment Torque | 1.8 N-cm max. |
Stop Strength | 2.5 N-cm min. |
Pushover Strength(Z Style) | 2 Kilograms minimum |
Weight | Approximately 0.2 gm. |
Marking | Manufacturer's trademark, life |
Switch Type | SPDT |
Operating Temp. Range | -55ºC to +125ºC |
Storage Temp. Range | -55ºC to +125ºC |
Seal Test | 85ºC Fluorinert† |
Electrical Spec
Contact Rating | Max current 100mA max. |
---|---|
Contact Rating | Max voltage 16 V |
Contact Timing | Non-shorting |
Contact Resistance | 2 ohms max. |
Insulation Resistance | 100 megohms min. |
Dielectric Strength | 250 VAC |
Drawing
- 7814J J-HOOK PRODUCT DIMENSION
- 7814H THROUGH-HOLE PRODUCT DIM
- 7814G GULL WING PRODUCT DIMENS
- 7814Z RIGHT ANGLE PRODUCT DIME
- CIRCUIT DIAGRAM